TW15.0 wheel torque transducer
Wheel torque transducer for light and medium-duty trucks, 9,492 N·m (7,000 lbf·ft) full scale, in a weatherproof stainless steel ring of Ø 396.04 mm for 15 in and larger wheels.
- 9 492 N·m
- Torque capacity
- 15 in and larger
- Rim size
- 0.1 % FS
- Non-linearity
- Sensor4-arm strain gage bridge
- Hysteresis≤ 0.05 % FS
- Signal transmissionslip ring or telemetry
TW15.0: wheel torque transducer for trucks, 9,492 N·m
Of the three rings TW10.8, TW12.8 and TW15.0, the TW15.0 is the largest and has the highest rating: 9,492 N·m (7,000 lbf·ft), which is also its combined steer/camber moment rating. The stainless steel ring is Ø 396.04 mm (15.592 in) by 25.64 mm thick, with a Ø 253.87 mm center bore, and adapts to 15 in and larger wheels. A four-arm strain gage bridge of 525 Ω gives one channel of torque data, with an output of 1.5 mV/V nominal at up to 10 V excitation. Non-linearity is 0.1 % and hysteresis 0.05 % of full scale. It is temperature compensated from 24 to 121 °C and usable from −40 to 149 °C, or 177 °C short term.
The inner bolt circle, Ø 270.03 mm, has eighteen Ø 9.91 mm holes for the hub adapter; the outer circle, Ø 381.46 mm, has twelve for the rim adapter. The adapters are made from a profile of the original rim, and duplicate its critical dimensions. The weatherproof slip ring, encoder and amplifier assembly is an ordering option, as for all wheel torque transducers.
The TW15.0 is made for light and medium-duty trucks. For lighter vehicles, the TW12.8 covers 14 in and larger wheels up to 8.1 kN·m; above the TW15.0, the TW-2T-12.5K measures up to 16,948 N·m on single or dual wheels of 16 in and larger.
Specifications
| Torque capacity | 9 492 N·m |
|---|---|
| Non-linearity | ≤ 0.1 % FS |
| Hysteresis | ≤ 0.05 % FS |
| High resolution | No |
| Sensing principle | Strain gage (4-arm bridge) |
| Rated output | 1.5 mV/V |
| Excitation voltage | 10 V (maximum, DC or AC rms) |
| Bridge resistance | 525 Ω |
| Shaft diameter | 253.87 mm (center bore) |
| Mounting fasteners | 18 × Ø 9.91 mm |
| Rim fasteners | 12 × Ø 9.91 mm |
| Bolt circle | 270.03 mm |
| Rim bolt circle | 381.46 mm |
| Dimensions | Ø 396.04 × 25.64 mm |
| Operating temperature | −40 to 149 °C (long term; −40 to 177 °C short term) |
| Compensated temperature | 24 to 121 °C |
| Connections | Connector |
| Connector | Bendix PTY02E-8-4P |
| Vehicles | Light trucks · Medium-duty trucks |
| Rim size | 15 in (and larger) |
Resources
Datasheets and manuals
Drawings
CAD models
None for TW15.0.
Guides and notes
If the TW15.0 is not the one
- Need all six components Wheel force transducers
Six load components at the wheel center, while the vehicle is driven.
- Torque on the shaft instead CBT-mini
Battery-powered clamp-on telemetry transmitter for one full strain gage bridge, in an IP67 housing that straps to shafts of 25 mm or more, with a 2.4 GHz digital link.
- Torque at the power take-off PTO
Torque and speed at the power take-off, between the tractor and the implement, with nothing to modify.
A question on this product?
Wheel, vehicle, expected torque. An application engineer answers.
More details to give? Use the full contact form.