Skip to content
SR20/75/W

SR20/75/W sealed 20-circuit slip ring, 19.05 mm diameter

Sealed twenty-circuit end-of-shaft slip ring, 19.05 mm (0.75 in) in diameter, for low-level signals: strain gages, thermocouples, accelerometers and low voltages.

20
Circuits
0.75 in
Rotor and stator diameter
4 000 rpm
Max speed, without seal
500 mA
Max current per circuit
  • Max speed with weatherproof seal2 000 rpm
  • Max peak resistance variation0.1 Ω
  • Operating temperature−40 to 100 °C
  • Contactswires pre-attached

Sealed twenty-circuit slip ring, 0.75 in diameter

The SR20/75/W is a sealed end-of-shaft slip ring with twenty circuits rated at 500 mA and a peak resistance variation of 0.1 Ω. It carries strain gages, thermocouples, accelerometers and low voltages from rotor to stator. Its rotor and stator are both 19.05 mm (0.75 in) in diameter; it is 69.85 mm long, weighs about 100 g and runs from −40 to 100 °C.

Michigan Scientific supplies it with the wires pre-attached; the discrete wires leaving the rotor are 305 to 406 mm (12 to 16 in) long.

With its weatherproof seal it is rated to 2 000 rpm; with the seal omitted, to 4 000 rpm.

SR20/75/W, view 2

Specifications

Circuits20
Rotation sensorNone
Current per circuit500 mA
MountingEnd of shaft
Max speed4 000 rpm
Rotor diameter19.05 mm
DimensionsØ 19.05 × 69.85 mm
Operating temperature−40 to 100 °C
ConnectionsFlying leads (rotor and stator: wires pre-attached)
Drawing 1005843 (PDF)

Resources

Datasheets and manuals

None for this product.

CAD models

None for this product.

A question on this product?

Describe the measurement. An application engineer answers.

More details to give? Use the full contact form.

Where to send the answer

An application engineer replies within 24 hours on working days.

Contact us

Where to send the answer

An application engineer replies within 24 hours on working days.