TR3D-A round three-axis load cell
Round three-axis load cell for forces up to 4.4 kN per axis, in an aluminum body of Ø 58.7 × 25.2 mm.
Round three-axis load cell for forces up to 13.3 kN per axis, in a stainless steel body of Ø 58.7 × 25.2 mm.
Round three-axis load cell for forces up to 22 kN per axis, in a stainless steel body of Ø 58.7 × 25.2 mm.
Round three-axis load cell for forces up to 22 kN in X and Y and 44 kN in Z, in a stainless steel body of Ø 58.7 × 25.2 mm.
Round three-axis load cell for forces up to 44 kN per axis, in a stainless steel body of Ø 76.2 × 32.6 mm.
- 4.4 kN
- Measuring range per axis
- 40 N·m
- Max moment per axis
- 4.0 mV/V
- Output
- Ø 58.7 × 25.2 mm
- Dimensions
- 13.3 kN
- Measuring range per axis
- 215 N·m
- Max moment per axis
- 4.0 mV/V
- Output
- Ø 58.7 × 25.2 mm
- Dimensions
- 22 kN
- Measuring range per axis
- 280 N·m
- Max moment per axis
- 4.0 mV/V
- Output
- Ø 58.7 × 25.2 mm
- Dimensions
- XY 22 kN · Z 44 kN
- Measuring range per axis
- 280 N·m
- Max moment per axis
- 4.0 mV/V
- Output
- Ø 58.7 × 25.2 mm
- Dimensions
- 44 kN
- Measuring range per axis
- 461 N·m
- Max moment per axis
- 2.5 mV/V
- Output
- Ø 76.2 × 32.6 mm
- Dimensions
- Non-linearity≤ 0.5 % FS
- Included3.05 m cable · ISO/IEC 17025 calibration report
- Non-linearity≤ 0.5 % FS
- Included3.05 m cable · ISO/IEC 17025 calibration report
- Non-linearity≤ 0.5 % FS
- Included3.05 m cable · ISO/IEC 17025 calibration report
- Range per axisFx 22 · Fy 22 · Fz 44 kN
- Non-linearity≤ 0.5 % FS
- Included3.05 m cable · ISO/IEC 17025 calibration report
- Non-linearity≤ 1 % FS
- Included3.05 m cable · ISO/IEC 17025 calibration report
TR3D-A-1K: round three-axis load cell, 4.4 kN per axis
The TR3D-A-1K is a round three-axis load cell. Three four-arm strain gage bridges, one per axis, measure the forces in X, Y and Z, up to 4.4 kN (1,000 lbf) each; the maximum moment is 40 N·m per axis. The body is aluminum, Ø 58.7 × 25.2 mm, weatherproof sealed and temperature compensated. The full-scale output is 4.0 mV/V nominal, with non-linearity and hysteresis of 0.5 % of full scale or less, at up to 10 V excitation, DC or AC rms. It is usable from −40 to 149 °C and comes with a 3.05 m shielded cable with open-ended leads.
The top is fastened with a single M12 × 1.75 bolt, the fixture bearing around the threaded hole and not on the cover, and the base with six bolts; where the base cannot be reached, an optional bottom thread adapter, ordered separately, fixes it from above through the top hole. Two flats on the base index the load cell axes to the measurement axes. Each bridge is powered separately on its own four leads (P+, S+, S−, P−). The cell is not intended for large moments: several cells in an array between two stiff fixtures take them as forces. Each channel is calibrated to full scale, with an ISO/IEC 17025 calibration report that records cross-talk.
TR3D load cells are bolted between a seat and its mountings to measure the forces they carry while driving and in a crash, and used in groups of four under a machine to calculate its net forces and moments.
TR3D-A-3K: round three-axis load cell, 13.3 kN per axis
The TR3D-A-3K is a round three-axis load cell. Three four-arm strain gage bridges, one per axis, measure the forces in X, Y and Z, up to 13.3 kN (3,000 lbf) each; the maximum moment is 215 N·m per axis. The body is stainless steel, Ø 58.7 × 25.2 mm, weatherproof sealed and temperature compensated. The full-scale output is 4.0 mV/V nominal, with non-linearity and hysteresis of 0.5 % of full scale or less, at up to 10 V excitation, DC or AC rms. It is usable from −40 to 149 °C and comes with a 3.05 m shielded cable with open-ended leads.
The top is fastened with a single M12 × 1.75 bolt, the fixture bearing around the threaded hole and not on the cover, and the base with six bolts; where the base cannot be reached, an optional bottom thread adapter, ordered separately, fixes it from above through the top hole. Two flats on the base index the load cell axes to the measurement axes. Each bridge is powered separately on its own four leads (P+, S+, S−, P−). The cell is not intended for large moments: several cells in an array between two stiff fixtures take them as forces. Each channel is calibrated to full scale, with an ISO/IEC 17025 calibration report that records cross-talk.
TR3D load cells are bolted between a seat and its mountings to measure the forces they carry while driving and in a crash, and used in groups of four under a machine to calculate its net forces and moments.
TR3D-A-5K: round three-axis load cell, 22 kN per axis
The TR3D-A-5K is a round three-axis load cell. Three four-arm strain gage bridges, one per axis, measure the forces in X, Y and Z, up to 22 kN (5,000 lbf) each; the maximum moment is 280 N·m per axis. The body is stainless steel, Ø 58.7 × 25.2 mm, weatherproof sealed and temperature compensated. The full-scale output is 4.0 mV/V nominal, with non-linearity and hysteresis of 0.5 % of full scale or less, at up to 10 V excitation, DC or AC rms. It is usable from −40 to 149 °C and comes with a 3.05 m shielded cable with open-ended leads.
The top is fastened with a single M12 × 1.75 bolt, the fixture bearing around the threaded hole and not on the cover, and the base with six bolts; where the base cannot be reached, an optional bottom thread adapter, ordered separately, fixes it from above through the top hole. Two flats on the base index the load cell axes to the measurement axes. Each bridge is powered separately on its own four leads (P+, S+, S−, P−). The cell is not intended for large moments: several cells in an array between two stiff fixtures take them as forces. Each channel is calibrated to full scale, with an ISO/IEC 17025 calibration report that records cross-talk.
TR3D load cells are bolted between a seat and its mountings to measure the forces they carry while driving and in a crash, and used in groups of four under a machine to calculate its net forces and moments.
TR3D-A-5/5/10K: round three-axis load cell, 22 kN in X and Y and 44 kN in Z
The TR3D-A-5/5/10K is a round three-axis load cell. Three four-arm strain gage bridges, one per axis, measure the forces in X, Y and Z, up to 22 kN (5,000 lbf) in X and Y and 44 kN (10,000 lbf) in Z; the maximum moment is 280 N·m per axis. The body is stainless steel, Ø 58.7 × 25.2 mm, weatherproof sealed and temperature compensated. The full-scale output is 4.0 mV/V nominal, with non-linearity and hysteresis of 0.5 % of full scale or less, at up to 10 V excitation, DC or AC rms. It is usable from −40 to 149 °C and comes with a 3.05 m shielded cable with open-ended leads.
The top is fastened with a single M12 × 1.75 bolt, the fixture bearing around the threaded hole and not on the cover, and the base with six bolts; where the base cannot be reached, an optional bottom thread adapter, ordered separately, fixes it from above through the top hole. Two flats on the base index the load cell axes to the measurement axes. Each bridge is powered separately on its own four leads (P+, S+, S−, P−). The cell is not intended for large moments: several cells in an array between two stiff fixtures take them as forces. Each channel is calibrated to full scale, with an ISO/IEC 17025 calibration report that records cross-talk.
TR3D load cells are bolted between a seat and its mountings to measure the forces they carry while driving and in a crash, and used in groups of four under a machine to calculate its net forces and moments.
TR3D-A-10K: round three-axis load cell, 44 kN per axis
The TR3D-A-10K is a round three-axis load cell. Three four-arm strain gage bridges, one per axis, measure the forces in X, Y and Z, up to 44 kN (10,000 lbf) each; the maximum moment is 461 N·m per axis. The body is stainless steel, Ø 76.2 × 32.6 mm, weatherproof sealed and temperature compensated. The full-scale output is 2.5 mV/V nominal, with non-linearity and hysteresis of 1 % of full scale or less, at up to 10 V excitation, DC or AC rms. It is usable from −40 to 149 °C and comes with a 3.05 m shielded cable with open-ended leads.
The top is fastened with a single M18 × 2.5 bolt, the fixture bearing around the threaded hole and not on the cover, and the base with six bolts; where the base cannot be reached, an optional bottom thread adapter, ordered separately, fixes it from above through the top hole. Two flats on the base index the load cell axes to the measurement axes. Each bridge is powered separately on its own four leads (P+, S+, S−, P−). The cell is not intended for large moments: several cells in an array between two stiff fixtures take them as forces. Each channel is calibrated to full scale, with an ISO/IEC 17025 calibration report that records cross-talk.
TR3D load cells are bolted between a seat and its mountings to measure the forces they carry while driving and in a crash, and used in groups of four under a machine to calculate its net forces and moments.
Specifications
| Measured quantities | Fx · Fy · Fz |
|---|---|
| Force capacity | Fx 4.4 · Fy 4.4 · Fz 4.4 kN |
| Moment capacity | 40 N·m (max per axis) |
| Non-linearity | ≤ 0.5 % FS |
| Hysteresis | ≤ 0.5 % FS |
| Axes | 3 (orthogonal) |
| Sensing principle | Strain gage (3 four-arm bridges) |
| Rated output | 4 mV/V |
| Excitation voltage | 10 V (max, DC or AC rms) |
| Load thread | M12 × 1.75 |
| Mounting fasteners | 4 × M8 × 1.25 (and 2 × M8 × 1.25) |
| Dimensions | Ø 58.7 × 25.2 mm |
| Material | Aluminum |
| Operating temperature | −40 to 149 °C |
| Connections | Cable (shielded, open-ended leads) |
| Cable length | 3.05 m |
| Measured quantities | Fx · Fy · Fz |
|---|---|
| Force capacity | Fx 13.3 · Fy 13.3 · Fz 13.3 kN |
| Moment capacity | 215 N·m (max per axis) |
| Non-linearity | ≤ 0.5 % FS |
| Hysteresis | ≤ 0.5 % FS |
| Axes | 3 (orthogonal) |
| Sensing principle | Strain gage (3 four-arm bridges) |
| Rated output | 4 mV/V |
| Excitation voltage | 10 V (max, DC or AC rms) |
| Load thread | M12 × 1.75 |
| Mounting fasteners | 4 × M8 × 1.25 (and 2 × M8 × 1.25) |
| Dimensions | Ø 58.7 × 25.2 mm |
| Material | Stainless steel |
| Operating temperature | −40 to 149 °C |
| Connections | Cable (shielded, open-ended leads) |
| Cable length | 3.05 m |
| Measured quantities | Fx · Fy · Fz |
|---|---|
| Force capacity | Fx 22 · Fy 22 · Fz 22 kN |
| Moment capacity | 280 N·m (max per axis) |
| Non-linearity | ≤ 0.5 % FS |
| Hysteresis | ≤ 0.5 % FS |
| Axes | 3 (orthogonal) |
| Sensing principle | Strain gage (3 four-arm bridges) |
| Rated output | 4 mV/V |
| Excitation voltage | 10 V (max, DC or AC rms) |
| Load thread | M12 × 1.75 |
| Mounting fasteners | 4 × M8 × 1.25 (and 2 × M10 × 1.5) |
| Dimensions | Ø 58.7 × 25.2 mm |
| Material | Stainless steel |
| Operating temperature | −40 to 149 °C |
| Connections | Cable (shielded, open-ended leads) |
| Cable length | 3.05 m |
| Measured quantities | Fx · Fy · Fz |
|---|---|
| Force capacity | Fx 22 · Fy 22 · Fz 44 kN |
| Moment capacity | 280 N·m (max per axis) |
| Non-linearity | ≤ 0.5 % FS |
| Hysteresis | ≤ 0.5 % FS |
| Axes | 3 (orthogonal) |
| Sensing principle | Strain gage (3 four-arm bridges) |
| Rated output | 4 mV/V |
| Excitation voltage | 10 V (max, DC or AC rms) |
| Load thread | M12 × 1.75 |
| Mounting fasteners | 4 × M8 × 1.25 (and 2 × M10 × 1.5) |
| Dimensions | Ø 58.7 × 25.2 mm |
| Material | Stainless steel |
| Operating temperature | −40 to 149 °C |
| Connections | Cable (shielded, open-ended leads) |
| Cable length | 3.05 m |
| Measured quantities | Fx · Fy · Fz |
|---|---|
| Force capacity | Fx 44 · Fy 44 · Fz 44 kN |
| Moment capacity | 461 N·m (max per axis) |
| Non-linearity | ≤ 1 % FS |
| Hysteresis | ≤ 1 % FS |
| Axes | 3 (orthogonal) |
| Sensing principle | Strain gage (3 four-arm bridges) |
| Rated output | 2.5 mV/V |
| Excitation voltage | 10 V (max, DC or AC rms) |
| Load thread | M18 × 2.5 |
| Mounting fasteners | 4 × M12 × 1.75 (and 2 × M12 × 1.75) |
| Dimensions | Ø 76.2 × 32.6 mm |
| Material | Stainless steel |
| Operating temperature | −40 to 149 °C |
| Connections | Cable (shielded, open-ended leads) |
| Cable length | 3.05 m |
Connector and cable length can be specified when ordering.
Used with the TR3D-A
What you add here goes into the same quote request.
-
Read the three axes as ± 10 V
SGA3, the three-channel model of the SGA series
± 5 V bridge excitation, a ± 10 V output per axis and shunt calibration from a switch on the box.
One SGA3 per load cell.
-
Log every axis on one CAN bus
MUX-FB-12, the full-bridge module of the MUX-12 series
Twelve full-bridge inputs, one CAN 2.0 or CAN FD output up to 8 ksps, integrated shunt resistors for calibration.
Twelve channels per module; up to four modules stack for 48 synchronized channels.
Resources
Datasheets and manuals
Drawings
CAD models
Datasheets and manuals
Drawings
CAD models
Datasheets and manuals
Drawings
CAD models
Datasheets and manuals
Drawings
CAD models
Datasheets and manuals
Drawings
None for TR3D-A-10K.
CAD models
None for TR3D-A-10K.
Related applications
- Rig Force and moment load platform Net forces and net moments on a system, calculated from four three-axis load cells.
-
Component Seat forces Fx, Fy and Fz at each seat mounting, while driving and in a crash, with the seat at its production height. -
Agriculture PTO torque and power The torque and speed that the tractor delivers to the implement, measured during real field work. -
Agriculture Combine harvester gearbox Torque, speed and temperature on the pulleys, gears and gearboxes of a combine, to find power losses.
Other three-axis bodies
- Smaller, square TR3D-B three-axis load cells
From 25.4 × 25.4 × 12.7 mm, 1.1 to 71 kN per axis.
- Higher loads TR3D-C three-axis load cells
44 to 177 kN per axis, identical bolt patterns top and bottom.
- Your own part Custom transducers
The part itself, strain gaged and calibrated.
A question on this product?
Load range per axis, mounting, test type. An application engineer answers.
More details to give? Use the full contact form.