TR3D three-axis load cells
Three perpendicular forces from one body placed in the load path. Four bodies cover 1.1 to 444 kN per axis, sealed for the field and temperature compensated.
Four bodies, from the smallest to the strongest
-
TR3D-B
Square body, center thread on top
- Side
- 25.4 to 101.5 mm
- Moment limit
- 16 to 1 700 N·m
-
TR3D-A
Round body, center thread on top
- Diameter
- 58.7 or 76.2 mm
- Moment limit
- 40 to 461 N·m
-
TR3D-C
Square body, four threads per face
- Side
- 76.2 to 152.4 mm
- Moment limit
- 1 200 to 9 500 N·m
-
TR3D-D
Square body, eight threads per face
- Side
- 177.8 mm
- Moment limit
- 19 000 to 20 300 N·m
Applications
-
Component Engine mount loads The three forces each mount passes to the frame during start-up, acceleration and gear shifts. -
Component Robotics and prosthetics Forces in three directions, and moments, on a robot arm or a prosthetic foot, from a load cell small enough to fit in the assembly. -
Tires Tire-road friction Tire and road surface forces measured in three directions on a traction fixture, to find the coefficient of friction. -
Rig Force and moment load platform Net forces and net moments on a system, calculated from four three-axis load cells.
Around the load cell
Calibration, custom parts and rental, from the same team.
-
Service Calibration Accredited ISO/IEC 17025 calibration, 1 to 6 axes, for Michigan Scientific load cells and those of other manufacturers. See the service -
Service Custom transducers Your own part strain gaged and calibrated, or a load cell designed for your space and load case. See the service -
Service Rental Load cells rented for a test campaign, with custom mounting when needed. See the service
Technical data and documents
Specifications per model, drawings, 3D viewer and datasheets.
Frequent questions
Can I get moments from three-axis load cells?
Yes. Four TR3D load cells between a platform and the ground give the three net forces and the three net moments on the platform, by calculation from their twelve readings.
Do I need an amplifier?
Not if your recorder supplies bridge excitation and reads strain gage bridges directly. Otherwise an SGA box, the SGA3 for one TR3D, the SGA6 for two or the SGA12 for up to four, supplies the excitation and gives ± 10 V per axis, with shunt calibration from a switch on the box.
What comes with the load cell?
A shielded cable, 3.05 m on most models, and its calibration certificate.
What if no catalog model fits my part?
Custom load cells are designed and built in any quantity: 1 to 6 axes, 250 N to 667 kN, 100 N·m to 203 kN·m. Your own part can also be strain gaged and calibrated.
Technical support
An application engineer answers within 24 hours on working days. When equipment fails during a campaign, diagnosis is remote and a loan unit can be shipped, depending on the project.
How support works- < 24 h
- first answer from an application engineer
- Over 30
- wheel force transducers in the loan and rental fleet
- 1 to 2 weeks
- typical calibration turnaround
Which TR3D for your test?
Give the load range per axis, the mounting and the type of test. An application engineer answers with a reference and a price.
More details to give? Use the full contact form.